Table of Contents
    Material Certifications and IMDS Integration for Manufacturing Suppliers

    Material Certifications and IMDS Integration for Manufacturing Suppliers

    In modern manufacturing supply chains, producing quality parts is no longer sufficient, suppliers must prove quality through comprehensive documentation. Material certifications and the International Material Data System (IMDS) have become gatekeepers to doing business with automotive, aerospace, and medical OEMs. Understanding these requirements isn’t just about compliance; it’s about market access.

    This guide demystifies material certification requirements and IMDS integration, providing actionable frameworks for suppliers seeking to meet and exceed their customers expectations.

    Understanding Material Certifications

    Types of Material Certifications

    1. Mill Test Report (MTR) / Mill Certificate

    The foundational document from the raw material producer:

    Information Included

    Purpose

    Heat/lot number

    Traceability

    Chemical composition

    Alloy verification

    Mechanical properties

    Performance validation

    Production date

    Age-sensitive materials

    Specification compliance

    Standard conformance

    Mill identification

    Source verification

    2. Certificate of Compliance (C of C)

    Supplier declaration that material meets specified requirements:

    • May be based on MTR review

    • Typically issued by distributor or converter

    • Less comprehensive than full MTR

    3. Certificate of Analysis (C of A)

    Detailed chemical composition analysis:

    • Element-by-element breakdown

    • May include trace element reporting

    • Often required for critical applications

    4. Third-Party Inspection Certificates

    Independent verification by accredited bodies:

    • SGS, Bureau Veritas, TÜV, Lloyd’s Register

    • Often required for international shipments

    • Adds credibility and reduces customer inspection

    Industry-Specific Certification Requirements

    Automotive (IATF 16949)

    Document

    Requirement

    Retention

    Material certifications

    Full MTR for all production materials

    Production life + 1 year

    PPAP submissions

    PSW with material data

    Current + 1 revision

    IMDS reporting

    100% of supplied materials

    Indefinite

    MSDS/SDS

    Current safety data sheets

    Current version + 30 years

    RoHS/REACH

    Compliance declarations

    Current + 5 years

    Aerospace (AS9100 / AS9120)

    Document

    Requirement

    Retention

    Material certifications

    Full chemical and mechanical

    40 years minimum

    Test reports

    All testing performed

    40 years minimum

    Supplier certifications

    Approved source documentation

    Duration of approval

    Traceability records

    Heat/lot to finished part

    40 years minimum

    NADCOM / customer special

    Process certifications

    Per customer requirements

    Medical (ISO 13485)

    Document

    Requirement

    Retention

    Biocompatibility

    ISO 10993 testing

    Device lifetime + 2 years

    Material certifications

    Full traceability

    Device lifetime + 2 years

    Sterilization validation

    Gamma, EO, or autoclave data

    Device lifetime + 2 years

    Change control

    Material change notifications

    Indefinite


    Reading and Validating Mill Test Reports

    Material Certifications and IMDS document types

    Key Elements to Verify

    1. Specification Alignment

    Compare MTR specification to purchase order:

    Purchase Order Spec

    MTR Claim

    Verification

    ASTM B16

    ASTM B16 Rev 2021

    Match exact revision

    C36000

    C36000

    Verify UNS number

    H02 Temper

    H02

    Confirm temper

    1/2″ diameter

    0.500″

    Check dimensional

    2. Chemical Composition Analysis

    Typical brass composition table from MTR:

    Element

    Specification Range

    MTR Result

    Status

    Copper (Cu)

    60.0-63.0%

    61.8%

    ✓ Accept

    Lead (Pb)

    2.5-3.7%

    3.1%

    ✓ Accept

    Iron (Fe)

    Max 0.35%

    0.12%

    ✓ Accept

    Zinc (Zn)

    Remainder

    34.5%

    ✓ Accept

    Red Flags:

    • Elements outside specification range

    • Missing required elements

    • “Typical values” instead of actual test results

    • No test method cited (e.g., ASTM E415 for spectroscopy)

    3. Mechanical Property Verification

    Property

    Specification

    MTR Result

    Tolerance

    Tensile Strength

    58,000 PSI min

    62,400 PSI

    +9%

    Yield Strength

    45,000 PSI min

    48,200 PSI

    +7%

    Elongation

    25% min

    28%

    +12%

    Hardness

    80-90 HRB

    85 HRB

    Mid-range

    4. Traceability Elements

    Verify the MTR connects to your material:

    • Heat number matches material marking

    • Quantity received matches MTR quantity (or is subset)

    • Date aligns with production schedule

    The IMDS System Explained

    What is IMDS?

    The International Material Data System is the automotive industry’s global standard for collecting and managing material information:

    • Created by: OEM consortium (Audi, BMW, Daimler, EDS, Ford, Opel, Porsche, VW, Volvo)

    • Purpose: Track substances of concern; meet ELV, REACH, and other regulations

    • Scope: All materials and substances in automotive products

    • Current: Over 100,000 users; 400,000+ companies

    Regulatory Drivers

    Regulation

    Region

    IMDS Role

    ELV Directive 2000/53/EC

    EU

    Track and report recyclability; banned substance compliance

    REACH

    EU

    SCIP database integration; SVHC reporting

    China Standard GB/T

    China

    Material substance disclosure

    K-REACH

    Korea

    Similar to EU REACH

    Proposition 65

    California

    Substance disclosure for warnings

    GADSL

    Global

    Global Automotive Declarable Substance List compliance

    IMDS Structure

    The Hierarchy

    MDS (Material Data Sheet)

    ├── Component

    │   ├── Semi-component

    │   │   └── Material

    │   │       └── Substance (basic building block)

    │   └── Material

    │       └── Substance

    └── Material

        └── Substance


    Each Node Contains:

    • Identification (part number, name, weight)

    • Classification (IMDS code)

    • Application (where used in vehicle)

    • Substances with CAS numbers and weights

    Supplier IMDS Requirements

    Who Must Report

    Tier

    Responsibility

    Tier 1

    Report complete assemblies to OEM

    Tier 2

    Report components to Tier 1

    Tier 3+

    Report materials to upstream customers

    Material Suppliers

    Create base material MDSs

    Data Requirements

    Element

    Required Information

    Component name

    As on drawing/PBOM

    Part number

    Customer part number

    Weight

    Grams (accurate to 0.001g for small parts)

    Material classification

    IMDS standard codes

    Substances

    All >0.1% by weight (REACH threshold)

    CAS numbers

    Chemical Abstracts Service registry

    Recyclability

    Percentage recyclable content


    Creating IMDS Entries

    Material Certifications and IMDS

    Step-by-Step Process

    Step 1: Gather Information

    Required data collection:

    • Complete Bill of Materials (BOM)

    • Material certifications for all materials

    • Weights for each component and material

    • Supplier MDS IDs (if available)

    • Drawing specifications

    Step 2: Request Supplier MDSs

    Best practice: Don’t create materials from scratch if supplier already has MDS:

    • Request MDS ID and version from material supplier

    • Reference in your component MDS

    • Ensures consistency and reduces workload

    Step 3: Create Component Structure

    Example: Brass Valve Assembly

    Valve Assembly (Component)

    ├── Valve Body (Semi-component)

    │   └── C36000 Brass (Material)

    │       ├── Copper (7440-50-8): 61.5%

    │       ├── Zinc (7440-66-6): 35.0%

    │       ├── Lead (7439-92-1): 3.0%

    │       └── Iron (7439-89-6): 0.5%

    ├── Stem (Semi-component)

    │   └── 303 Stainless (Material)

    │       ├── Iron (7439-89-6): 69.0%

    │       ├── Chromium (7440-47-3): 18.0%

    │       └── Nickel (7440-02-0): 9.0%

    └── O-Ring (Material)

        └── Viton FKM (Material)

            └── [Complex polymer structure]

    Step 4: Classify and Code

    IMDS uses standardized classification codes:

    Code Range

    Category

    1.xxxxx

    Metals

    3.xxxxx

    Plastics

    5.xxxxx

    Electronics

    6.xxxxx

    Process chemicals

    7.xxxxx

    Miscellaneous

    Step 5: Validate and Submit

    IMDS checks include:

    • Weight balance (components sum to parent weight)

    • Prohibited substance screening

    • Missing information flags

    • Customer-specific validation rules

    Common IMDS Errors and Solutions

    Error

    Cause

    Solution

    Weight mismatch

    Components don’t sum to parent

    Recalculate and correct weights

    Jokers

    Unknown substances as placeholders

    Replace with actual substances or analysis

    Missing CAS

    Substance without CAS number

    Look up in IMDS substance list

    Rejected substance

    Banned or restricted material

    Find alternative material

    Application code error

    Wrong location classification

    Verify against IMDS code list


    Integrating IMDS into Quality Systems

    Process Integration Points

    1. New Product Introduction (NPI)

    • IMDS required before PPAP approval

    • Include in APQP timing plan

    • Assign IMDS responsibility in project team

    2. Supplier Management

    • Require IMDS capability in supplier selection

    • Include IMDS data in supplier quality agreements

    • Audit supplier IMDS processes

    3. Engineering Change Control

    • Any material change requires IMDS update

    • Change board must review IMDS implications

    • Customer notification for significant changes

    4. Production

    • Material lot traceability connects to IMDS

    • Ensure actual materials match IMDS declaration

    • Control substitution risks

    Documentation Control

    Required Records

    • All submitted MDS IDs and versions

    • Supporting material certifications

    • Supplier MDS references

    • Customer acceptance confirmations

    • Change history

    Retention Requirements

    • Production life + 15 years (automotive typical)

    • Verify specific customer requirements

    • Some OEMs require 30+ years

    Southeast Asia Implementation

    Regional Challenges

    Supplier Base Limitations

    • Many Tier 2/3 suppliers unfamiliar with IMDS

    • Limited access to testing for substance verification

    • Language barriers in system navigation

    Solutions

    • Provide IMDS training to key suppliers

    • Offer template MDSs for common materials

    • Engage IMDS service providers for support

    • Consider English-Chinese-Thai system translations

    Local Regulatory Considerations

    Thailand Automotive Standards

    • TISI (Thai Industrial Standards Institute) alignment with international standards

    • Board of Investment (BOI) incentives for EV supply chain participation

    • Increasing IMDS requirements from Japanese OEMs with Thai operations

    ASEAN Integration

    • ASEAN Automotive Federation harmonization efforts

    • Cross-border data sharing challenges

    • Mutual recognition of certifications developing

    Working with Regional OEMs

    OEM

    IMDS Requirements

    Special Considerations

    Toyota (Thailand)

    Full IMDS required

    Japanese material standards

    Honda (Thailand)

    Full IMDS required

    Strict change control

    Ford (Thailand)

    Full IMDS required

    Aligned with global Ford

    MG/SAIC (Thailand)

    Growing IMDS adoption

    Chinese material databases

    Local Assemblers

    Varies

    Often less stringent


    Best Practices for Material Documentation

    Types of Material Certifications — Show four cards distinguishing what each document provides: MTR for producer test and traceability detail

    1. Supplier Qualification

    Before approving material suppliers:

    • Verify certification capability

    • Review sample MTRs for completeness

    • Confirm IMDS experience (for automotive)

    • Audit traceability systems

    2. Incoming Inspection

    For each material lot:

    • Compare MTR to specification

    • Verify marking matches paperwork

    • Check for certificate authenticity

    • Retain samples if required

    3. Material Traceability

    Maintain lot tracking:

    • Heat/lot number linked to finished parts

    • First-in-first-out (FIFO) stock rotation

    • Segregation of different lots

    • Computerized tracking systems preferred

    4. Customer Communication

    Proactive documentation sharing:

    • Provide certifications with shipments

    • Maintain customer portals for document access

    • Notify of any certificate delays

    • Offer pre-submission review for critical parts


    FAQ

    Q1: How long must we retain material certifications?

    A: Retention periods vary by industry:

    • Automotive (IATF 16949): Production life + 1 year (minimum)

    • Aerospace (AS9100): 40 years from shipment

    • Medical (ISO 13485): Device lifetime + 2 years (often 10-15+ years)

    • General Industrial: Typically 7-10 years

    Always verify specific customer requirements, which may exceed industry standards.

    Q2: Can we use “typical” values from MTRs instead of testing each lot?

    A: Generally no for critical applications:

    • “Typical” or “nominal” values don’t represent actual lot

    • Most automotive and aerospace requires actual test results

    • Some non-critical applications may accept typical values with customer approval

    • When in doubt, require actual test results

    Q3: What if our material supplier won’t provide IMDS data?

    A: Options:

    1. Find alternative supplier with IMDS capability

    2. Create material yourself from composition data (requires accurate analysis)

    3. Use IMDS service provider to create entries

    4. Request customer assistance for critical sole-source materials

    Note: Creating materials from scratch requires accurate substance analysis—estimates not acceptable.

    Q4: Do we need IMDS for prototype parts?

    A: Typically yes:

    • Most OEMs require IMDS before PPAP approval

    • Prototype phase IMDS often marked “for prototype only”

    • Production IMDS must be updated for any material changes

    • Early IMDS submission prevents production delays

    Q5: How do we handle confidential material formulations?

    A: IMDS provides protection mechanisms:

    • Pseudo-substances: Hide exact formulation while declaring regulated substances

    • Joker system: For complex polymers where exact formula confidential

    • Supplier MDS: Reference supplier’s confidential MDS without disclosure

    • OEM agreement: Some customers accept offline disclosure for highly confidential materials

    Q6: What substances trigger IMDS reporting requirements?

    A: Two thresholds:

    • REACH SVHC: >0.1% by weight (reportable but not prohibited)

    • GADSL: Declarable substances at specified thresholds

    • ELV banned: Lead, mercury, cadmium, hexavalent chromium—prohibited with limited exceptions

    Q7: Can we update an IMDS entry after customer acceptance?

    A: Yes, through versioning:

    • New version supersedes old

    • Customer must accept new version

    • Always increment version for any change

    • Maintain history of all versions

    Q8: What’s the penalty for incorrect IMDS data?

    A: Consequences can be severe:

    • PPAP rejection: Cannot ship production parts

    • Stop shipments: Existing business halted until corrected

    • Fines: For regulatory non-compliance (REACH, ELV)

    • Recall liability: If non-compliant products reach market

    • Supplier score impact: Affects future business opportunities

    Align Manufacturing

    Align Manufacturing

    Align Manufacturing is a Western owned and operated engineering and manufacturing company with local staff, to help you effectively source your industrial parts for US projects from South and South East Asia.